SeXplorándote
Just in Case
Just in Case
Couldn't load pickup availability
Characteristics
Disinfect with UV and recharge your toy at the same time
- The case lights up inside when sanitized, while indicator lights on the outside of the case show charging progress.
- The case holds two full charges: wirelessly recharge your vibrator on the go
- Soft ABS toy with 1 vibration speed and 6 pulsation patterns
- Bath toy, do not allow the case to come into contact with water.
Instructions
This product is delivered partially charged. Please fully charge it before use.
Charging the Vibrator: Place the vibrator in the case and close the lid. The lights will illuminate and flash while the product charges. The number of illuminated lights reflects the current battery level. When the product is fully charged, the lights will stop flashing and remain lit. The case holds two full charges for your vibrator, allowing for convenient wireless charging wherever you are.
Charging the Case: Use the included USB power cable and insert the charging connector into the opening on the back of the case; then plug the other end into a USB port. Close the lid. The lights will illuminate and flash while the product charges. The number of illuminated lights reflects the current battery level. When the case is fully charged, the lights will stop flashing and remain on.
UV Sanitizer Information: The case can also be used to sanitize the vibrator. Before sanitizing with UV, wash the toy with clean water and cleaning spray. Spray cleaning spray on the toy, rinse it with running water, wipe it, and pat it dry as needed. The toy must be completely dry before placing it in the case. For UV sanitization, insert the vibrator into the case and gently rotate it until the cavity light turns solid. A solid light inside the case indicates the UV sanitizer has activated. If the light flashes, the vibrator is not aligned inside the case. Close the case lid and wait 20 minutes for the sanitizing cycle to complete. Do not open the case before the cycle ends, as this will interrupt the sanitizing. If the case is accidentally opened before the cycle ends, close the lid to restart it.
Using the vibrator: To turn it on, press and hold the button for 3 seconds. To cycle through vibration speeds and pulsation patterns, press the button. To turn it off, press and hold the button for 3 seconds.
Wash your area before and after each use. For best results, use the cleansing mist.
What does it include?
· Just In Case vibrator and case set
Share

